PVC-M Pipe for Water Supply - China HDPE/PVC Pipe& Fittings Manufacturer

PVC-M Pipe for Water Supply

PVC-M pipe for water supply, while maintaining the advantages of PVC-U pipe, improves the pipe’s ability to resist water hammer and point load, with better toughness and higher strength.

1.Raw material:(1)Unplasticized polyvinyl chloride with toughener;
2.Diameter Range: (2) From 63mm-800mm；
3.Pressure Rating: PN8- PN25；
4.Standard: ISO，DIS 16422, GB/T 32018, etc；
5.Application:Water supply pipeline, mining water supply pipeline, trenchless pipeline, etc；
6.Delivery:(6)10-30 days depending on the total quantity；
7.CO(Certificate of Origin): China, CO could be provided by free；
8.MOQ: Retail or Bulk orders acceptable；
9.Production Inspection:QA system, Raw Material Test Report, Third-Party Inspection.

✉ E-mail: [email protected] ☎ Mobile: +8615515596408(WhatsApp/Wechat)
EXTRA VALUABLE SERVICE
✧High Quality: ISO certificated ✧Global Transportation Service
✧Free samples& Free Design ✧Full Satisfaction Guaranteed: 5 Years

Category: PVC Pipes

Description

Description of PVC-M Pipe for Water Supply

PVC-M water supply pipe, impact-resistant modified polyvinyl chloride PVC-M pipe for water supply, is based on the production formula of PVC-U pipe, adding toughener, controlling equipment process, so as to obtain PVC-M pipe with better toughness and higher strength.
The toughening modification methods are divided into chemical toughening and physical toughening. While maintaining the elastic modulus of PVC-U pipe, PVC-M pipe improves the flexibility of the pipe. Its toughness is between PVC-U and PE. Good flexibility improves the ability of the pipe to resist water hammer and point load, and improves the safety of pipeline operation. PVC-M pipe for water supply has the advantages of PVC-U, and its impact resistance and flexibility are significantly improved. It has been widely used in water supply pipeline, as well as mine water supply, trenchless laying pipeline and other harsh environments, with excellent performance. Different countries use different names for PVC M pipes. The United States and Australia call it PVC-M, Japan and the Netherlands call it PVC-HI, and the United Kingdom calls it PVC-A.

Advantages of PVC-M Pipe for Water Supply

1、Better toughness than PVC-U, strong impact and explosion resistance
2、Resistance to water hammer and point impact, limited reduction of damage during operation
3、Corrosion and chemical resistance
4、Stronger water delivery capacity
5、Lightweight, easy to transport and install
6、Smaller pipe wall thickness, reduced raw material consumption, more economical

Please Contact us to Get More Details, Send Email: [email protected]. or Mobile:(WhatsApp): +86 155 15596408.

Specification

Specification of PVC-M Pipe for Water Supply

Nominal Outside Diameter dn(mm)	Pipe Series S and Nominal Pressure PN					Rubber Ring Joints Minimum Socket Depth mmin	Solvent Cement Joints Minimum Socket Depth mmin
	S20	S16	S12.5	S10	S8
	SDR41	SDR33	SDR26	SDR21	SDR17
	PN8	PN10	PN12.5	PN16	PN20
	Nominal Wall Thickness en
63	2.0	2.0	2.5	3.0	3.8	64.0	37.5
75	2.0	2.3	2.9	3.6	4.5	67.0	43.5
90	2.2	2.8	3.5	4.3	5.4	70.0	51.0
110	2.7	3.4	4.2	5.3	6.6	75.0	61.0
125	3.1	3.9	4.8	6.0	7.4	78.0	68.5
140	3.5	4.3	5.4	6.7	8.3	81.0	76.0
160	4.0	4.9	6.2	7.7	9.5	86.0	86.0
180	4.4	5.5	6.9	8.6	10.7	90.0	96.0
200	4.9	6.2	7.7	9.6	11.9	94.0	106.0
225	5.5	6.9	8.6	10.8	13.4	100.0	118.5
250	6.2	7.7	9.6	11.9	14.8	105.0	–
280	6.9	8.6	10.7	13.4	16.6	112.0	–
315	7.7	9.7	12.1	15.0	18.7	118.0	–
355	8.7	10.9	13.6	16.9	21.1	124.0	–
400	9.8	12.3	15.3	19.1	23.7	130.0	–
450	11.0	13.8	17.2	21.5	26.7	138.0	–
500	12.3	15.3	19.1	23.9	29.7	145.0	–
560	13.7	17.2	21.4	26.7	–	154.0	–
630	15.4	19.3	24.1	30.0	–	165.0	–
710	17.4	21.8	27.2	–	–	177.0	–
800	19.6	24.5	30.6	–	–	190.0	–
1: The minimum required strength of the pipe is not less than 24.5MPa, the nominal wall thickness (en) is determined according to the design stress (as) 16MPa, and the minimum wall thickness of the pipe is 2.0mm. 2：“-” Indicates not recommended. 3：When the length of the pipe is longer than 12 m, the rubber ring joints socket depth mmin needs to be designed separately.