Onshore pump TW(E)/TW(F) fully automatic self-priming electric pump

Description of Onshore pump TW(E)/TW(F) fully automatic self-priming electric pump

The Fuxing fully intelligent self-priming vortex pump is an intelligent automatic water supply system that combines a motor, water pump, pressure tank, pressure switch, flow sensor, and electronic controller. The electronic controller can start in time according to changes in pipeline pressure and flow. Or turn off the water pump to provide users with a stable, safe and comfortable water environment.

Advantages of Onshore pump TW(E)/TW(F) fully automatic self-priming electric pump

1. The smart chip automatically starts and stops, and the smart chip is configured to achieve the effect of automatically starting and stopping when using water.
2. Dual control, complete functions, more intelligent.
3. Unique humanized pressure debugging design.
4. Scroll type fast self-priming and super power saving.

Product details:

1. Water inlet: built-in stainless steel filter to block impurities and prevent machine jamming.
Microcomputer control: two-way control system, pressure control + water flow control, to promote the normal operation of the water pump.
2. High-quality pressure tank: helps stabilize the network pipe pressure and avoid repeated starts and stops.
3. Heat dissipation vent design: large ventilation path, strong heat dissipation and longer service life of the machine.

Things you should pay attention to during installation:

1. Before installing the self-priming pump, you should carefully check whether the bolts of the self-priming pump are loose and whether there are any foreign objects falling into the pump body to avoid damaging the impeller when the self-priming pump is running.
2. The suction pipe and outlet pipe of the self-priming pump cannot be supported by the water pump, but require separate brackets to support the inlet and outlet pipes, and the diameter of the inlet and outlet pipes should match the diameter of the self-priming pump, especially the inlet pipe cannot If the inlet pipe of the self-priming pump is reduced during installation, the outlet pipe must also be reduced. We suggest that it is best to configure the corresponding pipe according to the factory standard diameter.
3. For the convenience of maintenance and safe use, a regulating valve should be installed on the inlet and outlet pipes of the self-priming pump, and a pressure gauge should be installed between the outlet valve and the pump to ensure that the self-priming pump operates within the rated flow and head range. Use it inside, so that the self-priming pump can operate normally and extend the service life of the self-priming pump.
4. Before the self-priming pump is installed and started, the pump shaft should be turned and liquid should be poured into the pump cavity at the same time, so that the liquid fills the pump cavity for the purpose of exhaust. Check whether there is any leakage in the pump. There should be no friction sound or stuck phenomenon in the impeller. If there is friction or sticking, the pump should be disassembled and the specific cause should be checked to resolve it.